Improved HeatScan Complex

Our diagnostic complex, designed to measure the wall thickness of the pipeline and defects detection, can now monitor the pipes of the following parameters:

Range of controlled diameters	400-1600 mm (158-630 inch)
Pipe wall thickness range	3-16 mm(0.11-0.63 inch)
Length of control	500 m (19685 inch)
The amount of deposits on the inner surface of the pipe	15 mm normal and up to 30mm with loss of sensitivity (0.59inh (up to 1.18inh))
Sizes of detected defects / measured defects	through defect with a diameter of 6 mm(0,24 inh); corrosion damage with a diameter of 30 mm (1.18 inh) and a depth of 0.2 pipe wall thickness
Effectivenes	Not less than 100 m / h
Elbows passing	2
Y-bend passing	Yes
The error in measuring the residual thickness in the defect zone	20% of thinckness
Relative humadity	100%
Operating temperature range	0-70°С